|
|
Product ID: GF-1000 Series
Wide Belt Sander - Belt Sander, Wide Belt Sanding ,3 Capacity
Outside Mounted Motor
Conveyor table height from floor: 900mm.
Convenient Size Correcting
Sanding size error can be fast and conveniently corrected by adjusting the parallelism. Between the sanding belt drive rollers.
European Imported Motor (Optional)
Upon request, the machine is compatible with European imported motor for upgrading efficiency and minimum trouble.
Timing Belt Transmission
The machine employ imported high quality timing belt, providing full power transmission without belt slipping problem.
Brake Controlled by Photocell Sensor
In case sanding belt runs out of normal track or breaks, the photocell sensors actuate brake immediately. This avoids damaging on machine while providing a dependable safety protection. (Conventional limit switch is often damaged and insufficient for safety protection.)
Automatic Lubricator (Optional)
The lubricator provides automatic and frequent lubrication to the conveyor table elevation mechanism. It ensures smooth elevation motion and high positioning accuracy, and extends pants service life.
Precision Ball Screw
The conveyor table elevation is transmitted through the imported high precision ball screws. Loading capacity on each ball screw is 1.8tons. Accuracy tolerance is กำ0.005mm
Sanding Belt Tension Elevation Cylinder
Employs oscillating bearing design to ensure smooth oscillation motion. High quality air cylinder features long service life.
|
Click here for details.
|
Features:
- Poweful Motor Drive
- Big , Rubber Covered Contact Drum
- Spring Loaded Pressure Rollers
- Wera Resistan Pressure Plate
- Variable Feed Speed
- Power Conveyor Table Elevation Digital Position Control
- Load-indication Amp. Meter
- Emergency Stop Switch
- Pressure Plate For Short Wood (Optional)
- Steel Contact Roller (Optional)
- Hydraulic Feed System (Optional)
|
| Model |
GF-1000-OA |
GF-1000-OOA |
| Working width |
950 mm |
950 mm |
| Working height |
130 mm |
130 mm |
| Main motor standard |
30, 20 HP |
30, 25, 20 HP |
| Feed motor |
3 HP |
5 HP |
| Table hoist motor |
1/2 HP |
1/2 HP |
| Feed speeds (Variable) |
6-20 M/min |
6-20 M/min |
| Sanding belt size |
84"x38" |
84"x38" |
| Compressed air required |
6 kg/cm² |
6 kg/cm² |
| Exhaust volume requirement |
3,500 M³/Hr |
5,180 M³/Hr |
| Net weight |
3,000 kg |
4,000 kg |
| Gross weight |
3,250 kg |
4,300 kg |
|
Ordering information:
- Minimum Order: Negotiable
- TEL: 886-4-22394422
- FAX: 886-4-22394420
|
|
|
Home | Company | Showroom| Inquire |
;)