Sander Machine, Moulder Machine, Wide Belt Sander, 4 Side Planer and Moulder, Tenoner Machine

Product

4 Side Planer & Moulder - Four Side Planner, Side Planner, Four Side Moulder

Product ID: GF Series

These CE certified 4 sides planer & moulder integrates many fine features and comprehensive safety guards.
The machines are quality constructed ensuring maximum dependability after years of operation.

Centralized Pressure Regulation

All pressure regulations for the entire pneumatic system are centralized at front of the machine for added convenience for pressure regulations.

Sectional pressure adjustments for all pressure rollers ensure consistent pressure.

Powered Infeed Table Roller

The roller in the infeed table is powered, providing a smooth feeding effect for hard-feeding stock.

Vertical Spindle Adjustment Up To 60 mm

It allows to fit several tools on the vertical spindle, eliminating troublesome cutter change.The 60mm spindle adjustment provides full utiliztion for a single cutter.

Side Front Pressure Plate on Left Vertical Spindle

It fully eliminates roughness when feeding short or narrow stock. The pressure plate is easy to adjust

Centralized Lubrication

The spindles are lubricated by the centralized lubrication system for convenience.

Separated Motor and Spindle

separate mounting of motor and spindle eliminates spindle vibration.Fitted with a high speed belt for power transmission, this configuration enables a smooth moulding effect and close tolerance result while in heavy cutting.

Universal Spindle (Optional)

This spindle can be tilted for complicated cutting jobs.

Spindle Digital Positioning Controller (Optional)

Available to equip for controlling any spindle as requested.

The digital positioning controller permits fast, convenient and high accuracy spindle positioning.

Feed Magazine (Optional)

This mechanism provides maximum convenience for feeding stock into the machine,keeping downtime to the minimum, and increasing the rate of prouction.

Especially helpful when cutting short stock.

Model	GF-5S23	GF-6S23	GF-7S23	GF-8S23
Capacity: Planning width	10 ~ 230 mm	10 ~ 230 mm	10 ~ 230 mm	10 ~ 230 mm
Capacity: Planning thickness	7 ~ 160 mm	7 ~ 160 mm	7 ~ 160 mm	7 ~ 160 mm
Capacity: Feeding speed. Inverter control	6 ~ 36 m / min	6 ~ 36 m / min	6 ~ 36 m / min	6 ~ 36 m / min
Capacity: Min length of out	230 mm	230 mm	230 mm	230 mm
Spindle: Spindle speed	6,000 rpm	6,000 rpm	6,000 rpm	6,000 rpm
Spindle: Spindle diameter	Ø40 mm	Ø40 mm	Ø40 mm	Ø40 mm
Spindle: Adjustment of vertical spindle	60 mm	60 mm	60 mm	60 mm
Spindle: Adjustment of horizontal spindle	20 mm	20 mm	20 mm	20 mm
Cutter diameter: Tool cutting circle, 1^st bottom spindle, min. to max.	Ø125 ~ 160 mm	Ø125 ~ 160 mm	Ø125 ~ 160 mm	Ø125 ~ 160 mm
Cutter diameter: Tool cutting circle, vertical spindle, min. to max.	Ø100 ~ 180 mm	Ø100 ~ 180 mm	Ø100 ~ 180 mm	Ø100 ~ 180 mm
Cutter diameter: Tool cutting circle, horizontal spindle, min. to max.	Ø100 ~ 200 mm	Ø100 ~ 200 mm	Ø100 ~ 200 mm	Ø100 ~ 200 mm
Cutter diameter: Tool cutting circle, last bottom spindle, min. to max.	Ø100 ~ 250 mm	Ø100 ~ 250 mm	Ø100 ~ 250 mm	Ø100 ~ 250 mm
Motor horsepower: Spindle motor	7.5 HP, 10 HP	7.5 HP, 10 HP	7.5 HP, 10 HP	7.5 HP, 10 HP
Motor horsepower: Feeding motor. Inverter	5 HP	7.5 HP	7.5 HP	7.5 HP
Others: Table adjustment	12 mm	12 mm	12 mm	12 mm
Others: Infeed table length	1,800 mm	1,800 mm	1,800 mm	1,800 mm
Others: feed roller diameter	Ø140 mm	Ø140 mm	Ø140 mm	Ø140 mm
Others: feed roller width	2 x 50 mm	2 x 50 mm	2 x 50 mm	2 x 50 mm
Others: Machine dimension (L x W x H)	3,650 x 1,930 x 1,800 mm	4,250 x 1,930 x 1,800 mm	4,670 x 1,930 x 1,800 mm	4,960 x 1,930 x 1,800 mm
Others: Pocking dimension (L x W x H)	3,800 x 2,100 x 2,120 mm	4,400 x 2,100 x 2,120 mm	4,820 x 2,100 x 2,120 mm	5,110 x 2,100 x 2,120 mm
Others: Net weight	3,600 kgs	4,100 kgs	4,600 kgs	5,000 kgs
Others: Gross weight	4,100 kgs	4,700 kgs	5,200 kgs	5,700 kgs

Contact Detail

Contact:	Olivia
Address:	No. 29, Chien-Cheng Lane, Beitun District Taichung City, 406 Taiwan
TEL:	886-4-22394422
FAX:	886-4-22394420
Email:	gaufeng@woodmachine.com.tw
URL:	http://www.woodmachine.com.tw
ZIP:	406

	Centralized Pressure Regulation All pressure regulations for the entire pneumatic system are centralized at front of the machine for added convenience for pressure regulations. Sectional pressure adjustments for all pressure rollers ensure consistent pressure.
	Powered Infeed Table Roller The roller in the infeed table is powered, providing a smooth feeding effect for hard-feeding stock.
	Vertical Spindle Adjustment Up To 60 mm It allows to fit several tools on the vertical spindle, eliminating troublesome cutter change.The 60mm spindle adjustment provides full utiliztion for a single cutter.
	Side Front Pressure Plate on Left Vertical Spindle It fully eliminates roughness when feeding short or narrow stock. The pressure plate is easy to adjust
	Centralized Lubrication The spindles are lubricated by the centralized lubrication system for convenience.
	Separated Motor and Spindle separate mounting of motor and spindle eliminates spindle vibration.Fitted with a high speed belt for power transmission, this configuration enables a smooth moulding effect and close tolerance result while in heavy cutting.
	Universal Spindle (Optional) This spindle can be tilted for complicated cutting jobs.
	Spindle Digital Positioning Controller (Optional) Available to equip for controlling any spindle as requested. The digital positioning controller permits fast, convenient and high accuracy spindle positioning.
	Feed Magazine (Optional) This mechanism provides maximum convenience for feeding stock into the machine,keeping downtime to the minimum, and increasing the rate of prouction. Especially helpful when cutting short stock.

4 Side Planer & Moulder - Four Side Planner, Side Planner, Four Side Moulder(GF Series), Wooding Machine, Four Side Planner, Side ...

Product

4 Side Planer & Moulder - Four Side Planner, Side Planner, Four Side Moulder

Product ID: GF Series

Contact Detail